Deck Tape

Protect & seal new or existing deck frames

Protects against

Water Rot    Moisture Rot    Frame Weathering

Protect & seal new or existing deck frames

Protects against

Water Rot    Moisture Rot    Frame Weathering

Deck Tape completely protects and seals your new or existing deck frame, protecting from water rot, moisture rot and frame weathering.

Exposure to the elements outdoors can result in significant deck frame weathering. The most common area for this damage to occur is where the deckboards come in contact with the deck substructure. Protect your deck substructure with Walther Strong Deck Tape.

• Watertight
• Air and smoke tight
• Easy release
• Stickiness
• UV stable
• Self-sealing
  

Benefits

20 meter rolls in various widths:

  50mm (for joists)

  82mm (for noggins)

100mm (for double joists)

150mm

200mm

250mm

300mm

Dimensions

Deck Tape is a non-butyl self-sealing tape manufactured from a massively strong polymer acrylic adhesive, which gives a completely waterproof and weatherproof seal. With a permanent adhesive bond for 50 years and a 25-year guarantee, this greatly adds to the life of your deck frame. Tested with all timber treatments. Suitable to be used with both traditional timber decking and also the more advanced composite decking, Deck Tape™ will protect any timber decking substructure. When using a composite deck board, more of the moisture will be absorbed into the substructure as it will drain off the deck boards. Higher amounts of moisture will mean that the frame will rot faster if not sealed properly.

Deck Tape is a non-butyl tape

Non-Butyl tapes are particularly suitable for this application as they are completely UV stable and keep their integrity for longer.

This means that they have many advantages over both butyl and asphalt tapes.

In addition to this, it is stable from -40C to +93C with no cracking, peeling or strength loss.

What is Deck Tape ?

Joist Protection

Simply applying a strip of Deck Tape along the top of the joists as a ‘cap’ (rather than a wrap) protects the timber as it creates a strong seal from any moisture. 50mm Deck Tape works particularly well on standardised 2 inch timber as it acts as a ‘cap’ (slightly overlapping the edge of the timber) rather than a wrap. This prevents any moisture sitting on these flat surfaces and slowly rotting away the timber.

Deck Tape can be applied to joists in advance to the deck boards being fitted – It doesn’t deteriorate or affect the benefits and qualities that the tape brings to the deck.

Joist Hanger Protection

Traditionally the coating on the metal would have slowly corroded away the metal and brought weakness in. However, by simply applying a layer of Deck Tape this prevents the breaking down of the treatments so the sub-frame of your deck maintains its integrity.

Posts

Use Deck Tape on timber posts to create a waterproof and moisture-tight seal. Particularly useful for fence posts and any other timber that has contact with the ground.

Cut Ends

Generally this is a particularly weak spot for the moisture to start rotting the timber since there will not be any treatment on this part as it has been cut to size. Using one layer of Deck Tape will completely seal it off from all moisture and water-rotting or weathering.

Around Fasteners

Apply a layer of Deck Tape between the galvanised fixings and treated timber to prevent the fixing from corroding.

Where is Deck Tape Applied?